Help me Choose
my Pressure Washer.
Compare the specifications of your chosen pressure washers to determine the right fit for your application.
4,400 PSI - 4.2 GPM Hot Water Pressure Washer with Powerease 420 Engine and CP Triplex Pump - HW4415PA
4,400 PSI - 4.2 GPM Hot Water Pressure Washer with Powerease 420 Engine and CP Triplex Pump - HW4415PA
Couldn't load pickup availability
Specifications
FRAME
Reinforced Powder Coated Steel Frame
ENGINE
Powerease 420
CC
420
PSI
4,400
GPM
4.2
UNLOADER
Built-In
SERIES
Commercial
WARRANTY
Engine: 3 Years | 5 Years Reg / Pump: 7 Years / Burner: 3 Years / Coil: Lifetime
Start Type
Recoil & Electric
FUEL TANK CAPACITY
6.7 L / 1.8 GAL
PUMP MODEL
Centurion Pump CTG2
PUMP TYPE
Triplex
Hose Length
50' x 3/8" QC Double Wire Braided
MAX TEMPERATURE
93°C / 199°F
Tires
13" Ultra Premium Flat-Free
Nozzles Included
15°, 25°, 40° & Soaper
Soap Injector
Fixed
Pump Class
P4
Pressure Switch
Yes
Anti-Rol Brake
Yes
Hour Meter
Yes
Battery
55AH AGM Deep Cycle
Coil
96' x 1/2" Sch. 80 Cold Rolled Steel / Stainless Wrap
Weight
Unit Weight: 530 lbs / Box Weight: 580 lbs
Downloads
Spec Sheet
PRODUCT
DESCRIPTION
4,400 PSI 4.2 GPM Gas Direct Drive Diesel Fired Hot Water Pressure Washer with Powerease 420 Engine and CP Triplex Pump
The BE Power Equipment HW4415PA is a commercial-grade hot water pressure washer delivering 4,400 PSI at 4.2 GPM, powered by a Powerease 420 420cc recoil and electric start engine and equipped with a commercial-grade CP CTG2 P4 triplex pump with built-in unloader and fixed injector. A 12V Beckett diesel burner heats water through a 96' x 1/2" Sch. 80 cold rolled steel coil to a maximum temperature of 199°F / 93°C, delivering combined pressure and heat for cleaning applications that cold water cannot address.
Built on the Hot Water 4 Wheeler Frame with reinforced powder-coated steel construction, 13" Ultra Premium flat-free tires, and detachable wheels for bolt-down truck and trailer mounting, the HW4415PA is engineered for commercial and industrial operators who need portable, high-output hot water cleaning performance in demanding field environments. CSA certified in Canada.
When Hot Water Makes the Difference
Cold water pressure washing is effective for most outdoor surface cleaning. Hot water adds a critical advantage when the cleaning challenge involves grease, oil, or baked-on residue that cold water cannot break down efficiently. The combination of 4,400 PSI pressure and water heated to up to 199°F accelerates the breakdown of oils and fats at the molecular level, reducing cleaning time and chemical requirements across a wide range of industrial and commercial applications.
The HW4415PA is well suited for:
- Fleet and heavy equipment washing
- Oil-stained concrete and asphalt surfaces
- Farm machinery and dairy facility cleaning
- Construction site cleanup
- Degreasing parts, tools, and industrial components
- Food processing and sanitation applications
Features
Powerease 420 Engine with Recoil and Electric Start
The HW4415PA is powered by the Powerease 420 420cc OHV direct drive engine with both recoil and electric start. The electric start provides fast, reliable ignition for high-frequency commercial use. The unit includes a 55AH AGM deep cycle battery for sustained electric start performance in demanding field conditions. Key engine features include:
- Recoil and electric start for flexible starting in any conditions
- Direct drive system connecting engine directly to pump for compact, reliable power transfer
- Automatic low-oil shutdown to protect the engine
- Engine oil drain hose for easy maintenance
- 6.7 L / 1.8 GAL engine fuel tank
The Powerease 420 engine and all other components are covered under BE Power Equipment's warranty program.
Commercial-Grade CP CTG2 P4 Triplex Pump with Built-In Unloader
The CP CTG2 P4 class triplex pump delivers smooth, consistent pressure output at 4,400 PSI and is engineered for sustained commercial and industrial use in hot water cleaning applications. Key pump features include:
- P4 commercial pump class rated for high-temperature operation
- Built-in unloader that regulates water flow and maintains consistent pressure
- Thermal relief valve to protect pump components during extended idle periods
- Fixed injector for consistent detergent application via soap nozzle
12V Beckett Diesel Burner and Heating System
The 12V Beckett diesel-fired burner delivers 330,000 BTU of heat output, bringing water to a maximum temperature of 199°F / 93°C. The adjustable thermostat allows operators to dial in the precise water temperature for each application. The burner can be switched off entirely when hot water is not required, allowing full cold water operation when appropriate.
The heating system uses a 96' x 1/2" Schedule 80 cold rolled steel heating coil wrapped in a stainless steel jacket and backed by a lifetime warranty. A dedicated 6.7 L / 1.8 GAL black poly diesel fuel tank provides extended burner run time between refueling. The rocker burner switch provides simple on/off control at the unit.
Hot Water 4 Wheeler Frame with Detachable Wheel Mounting System
The HW4415PA is built on the Hot Water 4 Wheeler Frame — a reinforced powder-coated steel platform designed for stability, access, and flexible deployment. The frame features:
- Detachable wheels that can be removed to allow direct bolt-down mounting to a truck bed, trailer, or skid for permanent or semi-permanent installation
- Crane lift point at the top of the frame for safe crane loading and unloading on jobsites
- Anti-roll brake to prevent unintended movement on slopes and during transport
- Integrated hose and accessory storage to keep the hose, wand, and nozzles organized and accessible
- Truck Mount Ready (TMR) — designed for mobile commercial cleaning operations
13" Ultra Premium Flat-Free Tires
The 13" Ultra Premium flat-free tires provide stable, confident mobility across gravel, dirt, concrete, and uneven terrain without the risk of flats or pressure loss.
Hour Meter and Pressure Switch
The HW4415PA includes an hour meter for tracking engine run time and scheduling maintenance intervals, and a pressure switch for system monitoring and protection.
50-Foot x 3/8" Double Wire Braided High-Pressure Hose
The included 50' x 3/8" QC double wire braided rubber hose is rated for hot water pressure washing applications, providing durability, flexibility, and extended reach across large work areas.
36" Insulated Spray Wand and Trigger Gun
The included 36" QC insulated gun and wand assembly provides reach, control, and thermal protection for the operator during extended hot water cleaning sessions.
Quick-Connect Spray Nozzles
Quick-connect nozzles cover a full range of hot water cleaning applications:
- 0°: Pinpoint pressure for targeted surface cleaning
- 15°: Concentrated pressure for heavy-duty cleaning
- 25°: General-purpose washing
- 40°: Wide-angle rinse for delicate surfaces
- Soap: Low-pressure nozzle for applying detergent through the fixed injector
Safety Features
- Automatic low-oil shutdown: Turns off the engine if oil drops below a safe operating level
- Thermal relief valve: Releases built-up heat from the pump during extended idle periods
- Anti-roll brake: Prevents unintended movement during operation and transport
- Pressure switch: System monitoring and protection during operation
Warranty and Factory Testing
The HW4415PA is backed by a multi-component warranty from BE Power Equipment:
- Engine: 3-year limited warranty / 5-year with registration
- Pump: 5-year limited warranty
- Burner: 3-year limited warranty
- Heating Coil: Lifetime warranty
Each unit is functionally tested at the factory before shipping. Your pressure washer may arrive with minimal residual oil or fuel odor, which confirms the unit has passed quality testing and is ready for use.
Product Specifications
- Pressure: 4,400 PSI
- Flow Rate: 4.2 GPM
- Engine: Powerease 420 420cc OHV, Recoil and Electric Start
- Engine Fuel Tank: 6.7 L / 1.8 GAL
- Engine Oil Type: 10W-30
- Battery: 55AH AGM Deep Cycle
- Pump: CP CTG2 Triplex, P4 Class, Built-In Unloader, Fixed Injector, Thermal Relief Valve
- Pump Oil Type: 30W Non-Detergent
- Drive Type: Gas Direct Drive
- Burner: 12V Beckett Diesel Burner with Rocker Switch
- Burner Fuel Tank: 6.7 L / 1.8 GAL (Black Poly)
- BTU Output: 330,000
- Max Temperature: 199°F / 93°C
- Heating Coil: 96' x 1/2" Schedule 80 Cold Rolled Steel with Stainless Steel Wrap
- Frame: Hot Water 4 Wheeler Frame, Reinforced Powder-Coated Steel with Onboard Accessory Storage
- Wheels: 13" Ultra Premium Flat-Free, Detachable for Truck/Trailer Mounting
- Hose: 50' x 3/8" QC Double Wire Braided Rubber Hose
- Spray Wand: 36" QC Insulated Gun/Wand Assembly
- Nozzles: 5 Quick-Connect, 0°, 15°, 25°, 40°, and Soap
- Hour Meter: Yes
- Pressure Switch: Yes
- Anti-Roll Brake: Yes
- Crane Lift Point: Yes
- Truck Mount Ready: Yes
- Unit Weight: 530 lbs / 240.4 kg
- Unit Dimensions: 48.0" x 32.0" x 46.0"
- Series: Commercial
- Compliance: CSA Certified (Canada)
- Safety Features: Automatic low-oil shutdown, thermal relief valve, anti-roll brake, pressure switch
- Warranty: Engine 3 Yrs / 5 Yrs Registered | Pump 5 Yrs | Burner 3 Yrs | Coil Lifetime
- Factory Testing: Each unit is functionally tested before shipment. Minimal residual oil or fuel odor upon delivery is normal and confirms quality testing has been completed.
Included in the Box
- 50' x 3/8" QC Double Wire Braided Rubber Hose
- 36" QC Insulated Gun/Wand Assembly
- 0°, 15°, 25°, 40°, and Soaper QC Nozzles
- Engine Oil, Funnel, and Spark Plug Wrench
Package Information
- Box Weight: 580 lbs / 263.1 kg
- Box Dimensions (L x W x H): 45" x 33" x 52"
Actual product may vary slightly from images shown due to continuous product improvements. All BE Power Equipment pressure washers are functionally tested at the factory and may contain minimal residual oil or fuel odor upon delivery.
Commercial Hot Water Cleaning Performance — Built by BE
The BE Power Equipment HW4415PA delivers 4,400 PSI and 199°F hot water cleaning performance through a Powerease 420 engine, a 12V Beckett diesel burner, and a CP CTG2 P4 triplex pump — all mounted on the versatile Hot Water 4 Wheeler Frame with detachable wheel truck mounting, crane lift capability, and anti-roll brake. With a lifetime warranty on the heating coil and 5-year registered coverage on the engine, this is a complete commercial hot water cleaning platform built for sustained professional use.
HW4415PA — 4,400 PSI 4.2 GPM Gas Direct Drive Diesel Fired Hot Water Pressure Washer with Powerease 420 Engine and CP Triplex Pump.
Help me Choose
|
Frame
|
Reinforced Powder Coated Steel Frame | - | - |
|
Engine
|
Powerease 420 | - | - |
|
Pump Model
|
Centurion Pump CTG2 | - | - |
|
Pump Type
|
Triplex | - | - |
|
CC
|
420 | - | - |
|
PSI
|
4,400 | - | - |
|
GPM
|
4.2 | - | - |
|
Unloader
|
Built-In | - | - |
|
Series
|
Commercial | - | - |
|
Warranty
|
Engine: 3 Years | 5 Years Reg / Pump: 7 Years / Burner: 3 Years / Coil: Lifetime | - | - |
|
Engine Start
|
Recoil & Electric | - | - |
|
Hose Length
|
50' x 3/8" QC Double Wire Braided | - | - |
|
Max Temperature
|
93°C / 199°F | - | - |
|
Tires
|
13" Ultra Premium Flat-Free | - | - |
|
Nozzles Included
|
15°, 25°, 40° & Soaper | - | - |
Frequently Asked Questions about Pressure Washers
How to store a pressure washer?
To ensure the durability of your heavy duty pressure washer:
- Empty the gas tank to prevent fuel from degrading or clogging the engine.
- Empty the pump and hoses of any remaining water.
- Perform necessary maintenance before storage.
- Store in a dry area.
- Cover.
What is a pressure washer?
A power washer is a cleaning machine that uses a gasoline engine to power a high pressure water pump and nozzle. It’s used to clean driveways, decks, vehicles, outdoor furniture and more by spraying water at high PSI to remove dirt, grime, mold and other debris.Many models also come with a detergent tank for added cleaning power.
How does a power washer work?
A power washer works by drawing water from a connected hose and pumping it through a high pressure nozzle. The gas engine powers the pump which pressurizes the water and then expels it through the nozzle at high speed to clean the surface. The water pressure is measured in PSI (pounds per square inch) and the flow rate is measured in GPM (gallons per minute).Many models also feature adjustable water pressure settings to cater to different cleaning needs. BE makes pressure washing easy with models available for light jobs and heavy duty commercial cleaning projects.
Gas vs Electric power washers?
The main difference is that a gas pressure washer, known for its cleaning power, is powered by a gasoline engine, making it more powerful and portable, while an electric pressure washer is powered by electricity and is generally quieter and lighter.
Gas pressure washers are for heavy duty and large areas due to their durability, whereas electric pressure washers are for smaller jobs.
Your BE electric pressure washer is perfect for smaller jobs and built for portability, and we offer a wide range of electric models. Included with our electric models is a long extension cord for use anywhere around your house.
What to consider?
When choosing a gas pressure washer consider:
- Pressure (PSI): More PSI means more cleaning power but also more potential for damaging delicate surfaces.
- Flow Rate (GPM): More GPM means faster cleaning as more water is dispensed.
- Engine Power: Bigger engines mean more durability and power.
- Portability: Weight, handle design and wheel size for easier to move.
- Nozzles: Multiple spray nozzles to adjust the spray pattern for different tasks.
- Adjustable Nozzle: Allows for fine-tuning the spray intensity and pattern for various cleaning needs.
How much pressure do I need for?
The required pressure (PSI) and cleaning power depend on the surface you’re cleaning:
- Light duty (car washing, outdoor furniture): 1,300-1,800 PSI.
- Medium duty (patios, fences, decks): 2,000-3,000 PSI.
- Heavy duty (driveways, brick walls, large equipment): 3,000+ PSI.
Many pressure washers come with adjustable pressure settings to handle different cleaning tasks effectively.
Can a pressure washing damage surfaces?
Yes, a power washer can damage surfaces if used incorrectly. High pressure water can strip paint, dent soft surfaces or even cause structural damage if the pressure is too high or the nozzle is held too close to the surface. Always use the right PSI for the material you’re cleaning and keep a safe distance from delicate surfaces.
To prevent damage, consider using a model with adjustable pressure settings.
How to maintain your pressure washer?
To ensure the durability and smooth operation of a pressure washer:
- Change the oil as per manufacturer’s instructions.
- Clean or replace the air filter to ensure good airflow.
- Inspect and clean the nozzle regularly to prevent clogs.
- Drain the gas tank if you’re storing the washer for a long time.
- Check the hoses for leaks or damage and replace them if needed.
- Follow regular maintenance requirements to keep the washer in optimal condition.
Can I use a pressure washer in cold weather and low water temperature?
You can use a pressure washer in cold weather but it’s more difficult. The water flow rate in the hoses and pump can freeze and damage the equipment. If you plan to use your pressure washer in cold temperatures make sure to winterize it and store it in a warm area when not in use. You can also use anti-freeze solutions for pressure washers.
Some models are designed to use hot water, which can be particularly effective for cleaning in cold weather.
Do I need any accessories?
Common accessories for power washers:
- Different nozzles (0°, 15°, 25°, 40°, and soap nozzle) to adjust spray patterns.
- Extension wands for hard to reach areas.
- Surface cleaners for large flat areas like driveways and decks.
- Hose reels to store hoses neatly and prevent tangling.
- Foam cannon or detergent bottles for soap or cleaning solutions.
- Detergents for cleaning a wide variety of surfaces.