Product
Description
Eco-Friendly Anti-Freeze & Lubricant for Year-Round Pump Protection
When winter hits, your pressure washer’s biggest enemy isn’t dirt or grime — it’s freezing temperatures. Left unprotected, residual water inside your pump can expand into ice, cracking internal components, destroying seals, and turning a perfectly good unit into costly scrap. That’s why BE Power Equipment developed the BE Pressure Washer Pump Saver — your go-to solution for safely winterizing your pressure washer and dramatically extending the life of your equipment.
This premium, environmentally friendly antifreeze and lubricant formula is specifically engineered to protect pressure washer pumps from the damaging effects of freezing, corrosion, and mineral build-up. Whether you're storing your pressure washer in a garage, shed, or outdoors under cover, Pump Saver gives you peace of mind and protects your investment.
Why Use BE Pressure Washer Pump Saver?
Pressure washers are built for power, but their pumps are precision-engineered instruments that require care to perform reliably over time. Even trace amounts of leftover water can cause damage during freezing temperatures, and months of off-season storage can lead to dry, brittle seals or corroded components.
BE Pump Saver solves these challenges in one easy-to-use, all-in-one formula. It displaces water from the pump system, lubricates seals and pistons, and protects metal components against oxidation and corrosion. The device’s ability to directly disconnects the pump motor in case of an abnormality, such as a jammed impeller or loss of suction, helps to prevent further damage and reduce the risk of costly repairs. The result? Your pump is ready to go the moment spring rolls around — no surprises, no leaks, and no replacements.
Protecting Your Investment
Protecting your pump motor from damage is crucial to ensure the longevity and efficiency of your well or water pump system. The PumpSaver device is designed to prevent false or nuisance tripping, which can cause unnecessary downtime and maintenance costs. By using a proprietary microcontroller based voltage, power factor, and current-sensing circuit, the PumpSaver can detect power fluctuations, overcurrent, and underload conditions, and take action to prevent damage to the pump motor.
The device’s ability to directly disconnect the pump motor in case of an abnormality, such as a jammed impeller or loss of suction, helps to prevent further damage and reduce the risk of costly repairs. Additionally, the PumpSaver’s dry-well recovery feature, which begins a user-selectable timer when an abnormality is detected, allows for automatic restart of the pump motor once the issue has been resolved.
Regular maintenance and monitoring of your pump system, including checking for permission to access http and https errors.edgesuite.net, can help to identify potential issues before they become major problems. By investing in a PumpSaver device, you can help to protect your pump motor and ensure the continued operation of your well or water pump system.
Key Features
-
All-Season Protection: Prevents freezing down to -50°F (-45°C), shielding internal pump components from cracking and damage during winter storage.
-
Eco-Conscious Formula: Biodegradable and non-toxic, BE Pump Saver is safe for both users and the environment. It contains no harsh chemicals, making it safe to rinse away and easy to dispose of responsibly.
-
Anti-Corrosion Agents: Protects internal metal surfaces and fittings from rust, oxidation, and hard water scale — even in humid storage environments.
-
Seal Conditioner: Maintains the elasticity and integrity of O-rings, gaskets, and pump seals during long-term storage, reducing the risk of leaks or startup failures.
-
Quick and Simple to Use: Attaches directly to the pressure washer inlet via standard hose fittings. One treatment takes less than a minute.
-
Compatible with Most Brands: Works with BE, AR, CAT, General Pump, Comet, and virtually all other major pressure washer pumps.
How It Works
After use, your pressure washer pump often retains small amounts of water. In cold weather, this residual moisture can freeze, expand, and fracture delicate components. Even in mild climates, stagnant water can corrode internal metal parts and degrade rubber seals.
BE Pump Saver solves this with a unique two-in-one approach:
-
Displacement: The specially formulated fluid pushes out any remaining water from your pump system — even in hard-to-reach chambers.
-
Protection: It leaves behind a lubricating, non-freezing barrier that coats internal parts, preventing corrosion, mineral build-up, and seal deterioration.
Your pump is now clean, conditioned, and protected until the next season.
Application Instructions
Winterizing your pressure washer with BE Pump Saver is fast and easy. Follow these simple steps:
-
Turn off and disconnect your pressure washer from any water source and power supply.
-
Connect the Pump Saver container to your pressure washer’s inlet (typically via a garden hose thread).
-
Press or squeeze the container until fluid begins to exit the high-pressure side of the pump.
-
Watch for foam or fluid discharge from the outlet — this indicates the pump is fully treated.
-
Disconnect the product, and your pump is now protected for the winter.
For best results, use Pump Saver at the end of the season, before extended storage, or before freezing temperatures arrive.
Choosing the Right Solution
When choosing a pump protection device, it’s essential to consider the specific needs of your well or water pump system, including the type of pump, power requirements, and operating conditions. The PumpSaver device is designed to work with single-phase pumps and can be calibrated to specific pumping applications to reduce the possibility of false or nuisance tripping.
The device’s proprietary microcontroller based voltage, power factor, and current-sensing circuit provides advanced monitoring and protection capabilities, including detection of power fluctuations, overcurrent, and underload conditions. The PumpSaver’s output relay can be directly disconnected in case of an abnormality, such as a dead head or dry well, to prevent damage to the pump motor.
The device’s user-selectable “Restart Delay” timer allows for automatic restart of the pump motor once the issue has been resolved, reducing downtime and maintenance costs. When selecting a pump protection device, consider factors such as the device’s ability to reduce the risk of pump motor damage, its ease of installation and maintenance, and its compatibility with your existing pump system.
By choosing the right solution, you can help to protect your investment, reduce maintenance costs, and ensure the continued operation of your well or water pump system.
Environmental Responsibility
At BE Power Equipment, we believe protecting your equipment shouldn’t come at the cost of harming the environment. That’s why our Pump Saver formula is fully biodegradable, non-toxic, and free from phosphates, petroleum-based solvents, or other harsh chemicals.
You can safely rinse away any leftover product without fear of contaminating soil or water systems, making it ideal for homeowners, professionals, and environmentally conscious users alike.
Ideal For
-
Seasonal Equipment Storage: Perfect for pressure washers stored in garages, sheds, basements, trailers, or job sites where freezing conditions may occur.
-
Rental & Commercial Use: Maintains reliability and performance of pressure washers used intermittently or across multiple job sites.
-
Fleet Maintenance: Protects large quantities of pressure washers in municipal, contractor, and industrial settings.
-
DIY Homeowners: Whether you wash your siding once a year or clean vehicles regularly, Pump Saver ensures your washer is ready when you need it.
Compatibility
BE Pressure Washer Pump Saver is compatible with both gas and electric pressure washers. It works on units from all major manufacturers, including:
-
BE Power Equipment
-
AR (Annovi Reverberi)
-
CAT Pumps
-
General Pump
-
Comet
-
Simpson
-
Ryobi, Greenworks, Sun Joe, and more
If your pump has a standard garden hose or quick-connect fitting, BE Pump Saver will work.
Technical Specifications
-
Freezing Point: -50°F (-45°C)
-
Size Options: Multi-pack bundles (Minimum Order 12)
-
Ingredients: Non-toxic propylene glycol base with corrosion inhibitors and rubber conditioners
-
Shelf Life: 2 years (store in a cool, dry location with cap tightly sealed)
Why It Matters
Replacing a damaged pressure washer pump can cost hundreds of dollars — or more than the unit itself. Even minor cracks or corroded seals can render a pump useless, especially when damage isn't visible until spring startup. With BE Pump Saver, a few seconds of prevention saves you hours of frustration and unexpected repair costs.
It’s more than just insurance for your pump — it’s peace of mind.
Wrap-Up
The BE Pressure Washer Pump Saver is an essential tool for protecting your equipment and extending the life of your pressure washer pump. With a powerful yet eco-friendly formula, it offers industry-leading freeze protection, corrosion resistance, and seal lubrication — all in a quick and easy application.
Don't let winter ruin your investment. Winterize your pressure washer the smart way — with BE.